王中王鉄算盘开奖结果白小姐心水-摇钱树334435内部四肖

Address: shenzhen longhua new north road waves KangFa industrial park
Bus station: KangFa industrial park, the way for M214 bus, M340, 380 b, B646

·

You are hereHome > Technology Center

Is the machining coordinate system and the mechanical coordinate system the same thing?

source:[seo:selfurl]    release time : 2018-11-17 22:05

Most vertical CNC machining centers or CNC machine tools: Assume that the workbench does not move, the operator stands in front of the machine to observe the tool movement, the tool is X axis to the right, Y axis to the inside, Z axis to the right, both right hand flute Card coordinate system. The machine axes return to zero at a fixed point, which is the machine zero of the machine.
The zero point determined at the position where the workpiece is more convenient to align during programming is the programmed zero point. The workpieces of the mold factory are mostly rectangular, because the blanks are generally selected in the center of symmetry of the workpiece, also called the position of “four sides in the middle”, which is the zero point of the X and Y axes, and the Z value is mostly at the highest surface.


Scanning a surprise!

Copyright © www.sun-yas.com     Shenzhen KIA Electromechanical CO., LTD.    
Powered by XQWEB
Auto parts processing, Shenzhen mechanical processing and aluminum processing,
welcome to inquire.
Address: shenzhen longhua new north road waves KangFa industrial park  Zip code: 518109

Baidu
sogou